Supreme
Auto Flush

Efficient, Concealed, Hygienic: The Future of Smart Urinal Flushing

Each kit comes complete with sensor, solenoid and mains power adapter. Additional external junction box available on request

  • Sensor Operated
    Sensor unit detects human movement and sits within ceiling cavity (vandal resistant)

  • Water Efficiency & Cost Savings
    On demand flushing, with adjustable flushing cycles and a lock out period, significantly reducing water wastage

  • Hygienic
    Non touch, requires no human input, and a built in ‘hygiene flush’ to keep things fresh

Supreme Auto Flush

Categories: , ,

SPL’s products are available throughout New Zealand and overseas.
Call us on 0800 787 736 (Monday – Friday 8am to 4.30pm) and our team will direct you to the nearest reseller in your area.

Product Enquiry

  • Smart Sensor Technology

    Microwave field detection allows sensing through ceiling/walls with adjustable sensitivity

  • Concealed Sensor

    Unit sits within ceiling cavity, vandal resistant, no cutting or screwing required

  • Durability

    Reliable European solenoid, soft close (water hammer-free), DZR brass body

Specification

Sensor
Motion detect electronic microprocessor (microwave frequency 2.4GHz). Passable through wall/ceiling (in cases where ceiling is thick masonry or steel, sensor can be mounted externally on ceiling in a junction box)

Power Supply
Double insulated AC plug pack (cord length 1.8m)

Input
240V AC 50Hz

Output
24V AC 750mA – 1A

Sensitivity
Adjustable on the control module. Will beam directly down (does not radiate in every direction)

Solenoid Valve
24V AC 1A, DZR brass (SS available on request), 15mm female connection, normally closed and water hammer free – WaterMark

Pressure Range
2.5 – 5.00- Bar (250-500Kpa)

Flushing Cycle
Adjustable duration (2-120 seconds)

Delay Before Flush
60 seconds

Lockout Period
Adjustable (30 seconds to 1 hour). Detects movement during this period, but solenoid will stay closed

Dimensions – Control Unit
160mm (L) x 80mm (W) x 35mm (D)

Dimensions – Junction Box
190mm (L) x 110mm (W) X 60mm (D) IP54 rated (where sensor is required to be externally mounted due to thick masonry or steel)

WELS Rating
3 Star – 1.6L per flush, per stall

Warranty
12 months

Product Code
SAF300    – includes: System controller, power supply, solenoid valve and 2m cable (controller to solenoid)
SAF300E – includes: System controller, power supply, solenoid valve and 2m cable (controller to solenoid), junction box to externally mount control unit and fixing

In addition
You may require; isolation valve, backflow prevention (double check valve or airgap), inline filter (250-350 micron), pressure reducing valve

Application
Can be used for single stall, wall hung or trough style urinals in both direct feed and cistern style
– 1x control unit and 1x solenoid is sufficient for ~ 3 wall hung urinals or 2 meters of trough urinal
– 2x solenoids can be used to double the area covered with 1x control unit
Note: no more than 2x solenoids can be run from one control unit

  • Sensor

    Microwave field detection through ceiling or wall

  • Power

    Double insulated AC plug pack (cord length 1.8m)

  • Flushing Cycle

    Adjustable duration (2-120 seconds)

  • Suggested Applications

    Can be used for single stall, wall hung or trough style urinals in both direct feed and cistern style (new build or retrofit) in schools, public toilets, sports clubs, factories, offices

Downloads

Replacement Parts

You can buy replacement parts and consumables direct from our website.

Click through to our shopping cart.

View all